Fusion Fit Drysuit
Get FIT to Dive
|Abrasion resistant Gator Tech knees.||Heavy duty brass YKK dry zipper.||Drawstring bag, zipper wax and inflator hose included.||Deluxe suspender system with thermo formed back pad included.|
Fusion FIT is the first Fusion to use a skin specifically designed to fit women properly. Anatomically correct panels constructed out of super stretch neoprene ensure maximum streamlining and mobility. Gator tech armour on the knees and reinforced seams ensure maximum durability.
- Anatomically correct construction.
- Super stretch neoprene provides excellent mobility and streamlining.
- Gator Tech neoprene provides excellent protection to the knees.
- Seams are mauser taped and 6 thread sewn for maximum stretch and durability.
$1599.99Prices and packaging shown are only valid for Canada, and the Continental U.S.
Sizes2XS/XS, S/M, L/XL, 2XL/3XL, 4XL+
ColorsBlack with twilight.
Dimensions are rough guidelines only, weights Do not include the Tropical Bag
Each of the sizes have slightly different dimensions – but in general here is what we measured using an electronic scale:
2XS/XS – weighs 4.35 lbs with a rolled length of 18”, and a diameter of about 10”
S/M – weighs 4.75 lbs with a rolled length of 18”, and a diameter of about 10.5”
L/XL – weighs 5.0 lbs with a rolled length of 19” and a diameter of about 10.75”
2XL/3XL – weighs 5.5lbs with a rolled length of 20” and a diameter of about 11”
4XL+ – weighs 6.0lbs with a rolled length of 21” and a diameter of about 11.25”
The shell of the Fusion is just as easy to repair as our existing line of drysuits. Whether you are changing latex seals or repairing holes, all you need is a patch kit and a heat gun!
Whites launched a North American Demo Day Tour in Sept. ’07, after several dozen demo days, the number of people that have required a “Made to Measure” Fusion is negligible. The 5 In-Stock sizes that we carry fits virtually everyone. The suit has proven to be great for growing teenagers, curvaceous women, and divers of all shapes and sizes that have previously required a custom cut. This will make it very easy to find a dealer that carries YOUR size! No more guessing. Check out our size chart to find your size!!
We can absolutely install a latex hood on the Fusion – this process is much the same as installing a hood on any of our other available suits.
Permanent wrist rings are available on the fusion drysuit as a Made To Order option. Countless divers are now using our removable dry wrist ring system as well; either of these options are a great accessory for divers subject to cold hands.
Traditional 7 mm vulcanized boots are not available on the Fusion Drysuit, if you would like an attached boot, the
Made to Order Fusion drysuits are available with 10” relief zippers, as an alternative, urinal dump valves are also available, please refer to our options page for more information.
We have 2 different styles of pee valves available: the ultra low profile urinal dump valve and the mini urinal dump valve. Either of these styles can be installed on the Fusion. Please indicate side preference.
The most common risk in diving is scraping your suit on something sharp – whether it is coral, steel, or barnacles. With the Fusion this is not a concern. Not only does the outer skin act as a protective layer over the “dry” layer, but lycra is not that susceptible to being cut – it would have to be stretched to its maximum stretch, held in place, and then cut with a very sharp edge before it would tear.
Even if you did decide you needed another skin, you can simply take the old skin off (via Velcro at sleeves, feet and zipper) and purchase a new one.
We do realize that there is a perception that lycra is not durable – for that reason we recommend the tech skin or the Limited Edition Skin. Both skins offer a 1mm neoprene skin for excellent abrasion resistance.
Given the wide variety of body shapes and sizes that the new Fusion drysuit can accommodate, whites is using cone seals for all Fusion suits.
Many divers will already be familiar with the need to trim neck seals, but we encourage we to watch the above video prior to trimming your seals.
If you do not feel comfortable trimming your seals please contact Whites Manufacturing to have a qualified sales person walk you through the process. If you wish to order replacement seals please contact your Whites authorizes dealer.